Take a look at the table below to find the perfect paper support for your specific requirements.
If you’re unsure about which material to choose, take our specially designed quiz to discover the ideal option for you!
Find the card that fits your needs
Coated Papers
Sheet
Front
Coated paper. Weight 80 g/m2. The most used paper among the inexpensive range. Smooth surface with excellent printing results using CMYK colour method. One side yellow siliconised glassine.
Adhesive
Rubber based permanent adhesive for multiple purpose. High initial adhesion and removal difficulty make this material ideal to be used for labelling glass, plastic, metal and paper, both on flat and curve surfaces. This adhesive is approved by ISEGA (direct contact dry and moist, non fatty foodstuffs). Applications over +5° C and service temperature between -20°+70° C
Purpose
Documents • Food • Beverage • Chemical • Industrial • To freeze products The cheap answer to those who are looking for a good compromise between price and versatility. WE HIGHLY RECOMMEND TO ADD A UV VARNISH PROTECTION.
Sheet
Front
Coated paper. Weight 90 g/m2. The most used paper among the inexpensive range. Smooth and gloss surface with excellent printing results using CMYK colour method.
Adhesive
Water base permanent acrylic adhesive. Medium initial adhesion and easy application make this material ideal to be used for labelling glass, plastic, metal and paper. Approved for indirect contact with foodstuffs. Applications over +5° C and service temperature between -10°+70° C
Purpose
Food • Beverage • Chemical • Industrial The cheap answer to those who are looking for a good compromise between price and quality with a higher paper consistency compared to standard coated. WE HIGHLY RECOMMEND TO ADD A UV VARNISH PROTECTION.
Sheet
Front
Coated paper of 80 g/m2. The most used among inexpensive oil-resistant papers. Smooth surface with excellent results in four-color printing. Yellow silicone-coated glassine.
Adhesive
Rubber-based permanent adhesive for various applications. High initial adhesion and difficulty in removal make this coated paper ideal for labeling on glass, plastic, metal, and paper, on both flat and curved surfaces. ISEGA-approved adhesive (for direct contact with dry and moist, non-greasy foods). Application above 5 degrees and operating temperature between -20°C and +70°C.
Purpose
Oil, oil-preserved products, general food. An inexpensive solution for those seeking the right balance between versatility and price.
Front
Opaque coated paper of 85 g/m2. The most used among economical papers for the purpose of covering the applied surface. Smooth surface with excellent results in four-color printing. Yellow silicone-coated glassine.
Adhesive
Rubber-based permanent adhesive for a wide range of applications. High initial adhesion and difficulty in removal make this coated paper ideal for labeling on glass, plastic, metal, and paper, both on flat and curved surfaces. ISEGA-approved adhesive (direct contact with dry and moist, non-greasy food). Application above 5 degrees and operating temperature between -20°C and +70°C.
Purpose
Documental • Food • Beverage • Chemical • Industrial • Frozen Products An economical answer for those needing to cover the surface they are applied to. The right balance between versatility and price. UV VARNISHING IS RECOMMENDED FOR GREATER PROTECTION.
Polypropylene (plastic)
Sheet
Front
Weight 54 g/m2 and thickness 60 micron. Smooth and gloss surface with excellent printing results using CMYK colour method. High resistance to abrasion and elements when protected with Uv varnish finishing
Adhesive
Acrylic permanent adhesive. Medium initial adhesion, easy application, “remove and stick on” immedia- tely. These characteristics make this material the ideal choice for labelling glass, plastic, metal and paper. This adhesive is approved by ISEGA (direct contact dry and moist, non fatty foodstuffs). Applications over -5° C and service temperature between -40°+120° C
Purpose
Thanks to its moisture and dirt resistance, polypropylene is the ideal solution for different sectors: Food (excellent for oils) • Wine (fridge and ice bucket wine) • Beverage (excellent for beers) • Chemical • Industry The cheap answer to those who are looking for an inexpensive but strong product. WE HIGHLY RECOMMEND TO ADD A UV VARNISH PROTECTION.
Sheet
Front
Weight 50 g/m2 and thickness 70 micron. Smooth and matt surface with excellent printing results using CMYK colour method. Matt effect results very elegant on total white background. High resistance to abrasion and elements when protected with Uv varnish finishing.
Adhesive
Acrylic permanent adhesive. Medium initial adhesion, easy application, “remove and stick on” immedia- tely. These characteristics make this material the ideal choice for labelling glass, plastic, metal and paper. This adhesive is approved by ISEGA (direct contact dry and moist, non fatty foodstuffs). Applications over +5° C and service temperature between -10°+80° C
Purpose
Thanks to its moisture and dirt resistance, polypropylene is the ideal solution for different sectors: Food (excellent for oils) • Wine (fridge and ice bucket wine) • Beverage (excellent for beers) • Chemical • Industry The cheap answer to those who are looking for an inexpensive but strong product. WE HIGHLY RECOMMEND TO ADD A UV VARNISH PROTECTION.
Sheet
Front
Weight 54 g/m2 and thickness 60 micron. Smooth transparent surface with gloss effect. Excellent printing results using CMYK + White colour method. Clear material for “no label” look. High resistance to abrasion and elements when protected with Uv varnish finishing.
Adhesive
Acrylic permanent adhesive. Medium initial adhesion, easy application, “remove and stick on” immedia- tely. These characteristics make this material the ideal choice for labelling glass, plastic, metal and paper. This adhesive is approved by ISEGA (direct contact dry and moist, non fatty foodstuffs). Applications over -5° C and service temperature between -40°+120° C
Purpose
Thanks to its moisture and dirt resistance, polypropylene is the ideal solution for different sectors: Food (excellent for oils) • Wine (fridge and ice bucket wine) • Beverage (excellent for beers) • Chemical • Industry The cheap answer to those who are looking for an inexpensive but strong product. WE HIGHLY RECOMMEND TO ADD A UV VARNISH PROTECTION.
Sheet
Front
60 g/m2 polypropylene and 70-micron thickness with glossy silver metallic surface. Possibility of creating surprising effects during printing: • Using an opaque white base will keep the colors of the CMYK range unaltered, effectively neutralising the metallic effect. • If you choose not to use the opaque white, the colors will be influenced by the silver metallic coloring of the support, producing more or less brilliant effects depending on the chosen varnish.
Adhesive
Permanent acrylic adhesive. Medium initial adhesion and ease of application and immediate "removal and repositioning" make this support ideal for labeling on glass, plastic, metal, and paper. ISEGA-approved adhesive (direct contact with dry and moist, non-greasy foods) Application above +5 degrees and operating temperature between -10°C and +80°C.
Purpose
The moisture and stain resistance properties make polypropylene an ideal solution for multiple sectors: Food (excellent for oil) • Winemaking (all types of wine) • Beverage (excellent for beers) • Chemical UV PROTECTIVE VARNISH IS MANDATORY.
Front
Weight 43 g/sm and thickness 58 micron. Smooth and gloss surface with excellent printing results using CMYK colour method. High resistance to abrasion and elements when protected with Uv varnish finishing
Adhesive
Removable acrylic water based adhesive. Good longterm removability from a wide variety of surfaces. These characteristics make this material the ideal choice for labelling glass, plastic, metal and paper. This adhesive is approved by ISEGA (direct contact dry and moist, non fatty foodstuffs). Applications over 0° C and service temperature between -5°+60° C
Purpose
Thanks to its moisture and dirt resistance, polypropylene is the ideal solution for different sectors: Food (excellent for oils) • Wine (fridge and ice bucket wine) • Beverage (excellent for beers) • Chemical • Industry The cheap answer to those who need removable labels and who are looking for an inexpensive but strong product. WE HIGHLY RECOMMEND TO ADD A UV VARNISH PROTECTION. Product not guaranteed for thermo transfer printing (ribbon)
Polyethylene (plastic)
Sheet
Front
80 g/m2 polyethylene and 85-micron thickness with glossy finish. Smooth surface with excellent results in four-color printing. More flexible compared to the range of polypropylenes.
Adhesive
Permanent acrylic adhesive. Medium initial adhesion and the ease of application and immediate "removal and repositioning" make this support ideal for labeling on glass, plastic, metal, both on flat and curved surfaces. ISEGA-approved adhesive (direct contact with dry and moist, non-greasy foods). Application above -5 degrees and operating temperature between -40°C and +120°C.
Purpose
The resistance and flexibility properties make polyethylene an ideal solution for multiple sectors: Cosmetics • Chemical • Industrial • Home and Personal Care UV PROTECTIVE VARNISH IS ESSENTIAL TO ENSURE RESISTANCE TO ABRASION AND EXTERNAL CORROSIVE AGENTS.
Wine, Spirits and Specials
Sheet
Front
Natural embossed white paper WS (wet strength). Weight 90 g/m2. Hammered texture surface with excellent printing results using CMYK colour method. Ideal for elegant labels, combined to high value finishing such as Hot foil and 3d screen varnish.
Adhesive
Permanent rubber base adhesive. Medium-high initial adhesion and easy application make this material ideal to be used for labelling glass bottles. This adhesive is approved by ISEGA (direct contact dry and moist, non fatty foodstuffs). Applications from 0° C and service temperature between -20°+70° C
Purpose
Food • Wine (red wines and white wines not served in ice bucket) • Beverage A classic product rich in elegance and naturalness. WE HIGHLY RECOMMEND TO ADD A UV VARNISH PROTECTION AND TO STICK ONTO DRY SURFACES. REELS MUST BE WOUND WITH THE FACE-SIDE OUT
Sheet
Front
Natural white paper WS (wet strength). Weight 90 g/m2. Smooth natural surface with excellent printing results using CMYK colour method. Ideal for elegant labels, combined to high value finishing such as Hot foil and 3d screen varnish.
Adhesive
Permanent acrylic adhesive. Medium initial adhesion and easy application make this material ideal to be used for labelling glass bottles. Approved for direct contact non fatty foodstuffs. Applications over +5° C and service temperature between -20°+80° C
Purpose
Food • Wine (red wines and white wines not served in ice bucket) • Beverage A classic product rich in elegance and naturalness. WE HIGHLY RECOMMEND TO ADD A UV VARNISH PROTECTION AND TO STICK ONTO DRY SURFACES. REELS MUST BE WOUND WITH THE FACE-SIDE OUT
Sheet
Front
Wet strenght coated paper weight 80 g/m2. Smooth and cast gloss surface with excellent printing results using CMYK colour method.
Adhesive
Water base permanent acrylic adhesive. Medium initial adhesion and easy application make this material ideal to be used for labelling glass bottles in several environmental conditions. Approved for indirect contact with foodstuffs. Applications from +5° C and service temperature between -10°+70° C
Purpose
Food • Beverage • Chemical • Industry • Wine (only red wines) The cheap answer for those companies who work in medium moisture conditions. WE HIGHLY RECOMMEND TO ADD A UV VARNISH PROTECTION AND TO STICK ONTO DRY SURFACES.
Sheet
Front
Natural paper with plaster colour. Weight 95 g/m2. Felt-marked surface with excellent printing results using CMYK colour method. Tintoretto represents the most iconic paper in the Arconvert-Fedrigoni word. Ideal for elegant labels, combined to high value finishing such as Hot foil and 3d screen varnish.
Adhesive
Water base permanent acrylic adhesive. Medium initial adhesion and easy application make this material ideal to be used for labelling glass bottles. Not recommended for small diameter bottles Approved for indirect contact with foodstuffs. Applications from +5° C and service temperature between -10°+70° C
Purpose
Food (excellent for olive oil, balm, products preserved in oil) • Wine • Beverage A classic product rich in elegance and naturalness. Highly recommended for those products that will be in contact with oil and grease in order to avoid stains. WE HIGHLY RECOMMEND TO ADD A UV VARNISH PROTECTION AND TO STICK ONTO DRY SURFACES. REELS MUST BE WOUND WITH THE FACE-SIDE OUT
Sheet
Front
Natural white paper. Weight 80 g/m2. Laid surface, horizontally ribbed texture with excellent printing results using CMYK colour method. Ideal for elegant labels, combined to high value finishing such as Hot foil and 3d screen varnish.
Adhesive
Water base permanent acrylic adhesive. Medium initial adhesion and easy application make this material ideal to be used for labelling glass bottles. Approved for indirect contact with foodstuffs. Applications from +5° C and service temperature between -10°+70° C
Purpose
Food • Wine (only red wines) • Beverage A classic product rich in elegance and naturalness. WE HIGHLY RECOMMEND TO ADD A UV VARNISH PROTECTION AND TO STICK ONTO DRY SURFACES. REELS MUST BE WOUND WITH THE FACE-SIDE OUT
Sheet
Front
Natural white paper WS (wet strength). Weight 90 g/m2. Laid surface, ribbed texture with excellent printing results using CMYK colour method. Ideal for elegant labels, combined to high value finishing such as Hot foil and 3d screen varnish.
Adhesive
Acrylic permanent adhesive. Medium-low initial adhesion and easy application make this material ideal to be used for labelling glass bottles. This adhesive is approved by ISEGA (direct contact dry and moist, non fatty foodstuffs). Applications from +5° C and service temperature between -20°+70° C
Purpose
Food • Wine (red wines and white wines not served in ice bucket) • Beverage A classic product rich in elegance and naturalness. We highly recommend to add a UV varnish protection and stick-on dry surfaces. WE HIGHLY RECOMMEND TO ADD A UV VARNISH PROTECTION AND TO STICK ONTO DRY SURFACES. REELS MUST BE WOUND WITH THE FACE-SIDE OUT
Sheet
Front
Natural paper with beige colour. Weight 80 g/m2. Laid, smooth surface with excellent printing results using CMYK colour method. Ideal for elegant labels, combined to high value finishing such as Hot foil and 3d screen varnish.
Adhesive
Water base permanent acrylic adhesive. Medium initial adhesion and easy application make this material ideal to be used for labelling glass bottles. Approved for indirect contact with foodstuffs. Applications from +5° C and service temperature between -10°+70° C
Purpose
Food • Wine (only red wines) • Beverage A classic product rich in elegance and naturalness. WE HIGHLY RECOMMEND TO ADD A UV VARNISH PROTECTION AND TO STICK ONTO DRY SURFACES. REELS MUST BE WOUND WITH THE FACE-SIDE OUT
Sheet
Front
Natural paper with plaster colour. Weight 95 g/m2. Felt-marked surface with excellent printing results using CMYK colour method. Tintoretto represents the most iconic paper in the Arconvert-Fedrigoni word. Ideal for elegant labels, combined to high value finishing such as Hot foil and 3d screen varnish.
Adhesive
Water base permanent acrylic adhesive. Medium initial adhesion and easy application make this material ideal to be used for labelling glass bottles. Not recommended for small diameter bottles. Approved for indirect contact with foodstuffs. Applications from +5° C and service temperature between -10°+70° C
Purpose
Food • Wine (only red wines) • Beverage A classic product rich in elegance and naturalness. WE HIGHLY RECOMMEND TO ADD A UV VARNISH PROTECTION AND TO STICK ONTO DRY SURFACES. REELS MUST BE WOUND WITH THE FACE-SIDE OUT
Sheet
Front
Coated paper weight 90 g/m2. The most used paper among the inexpensive range for the wine world. Smooth surface with excellent printing results using CMYK colour method.
Adhesive
Permanent acrylic adhesive. High initial adhesion and easy application make this material ideal to be used for labelling glass bottles in several environmental conditions. Approved for direct contact non fatty foodstuffs. Applications over +5° C and service temperature between -20°+80° C
Purpose
Food • Beverage • Chemical • Industry • Wine (only red wines) The cheap answer for those companies who work in medium moisture conditions. WE HIGHLY RECOMMEND TO ADD A UV VARNISH PROTECTION AND TO STICK ONTO DRY SURFA- CES.
Front
80 g/m2 recycled birch-colored natural paper. A natural surface, ideal for those who desire a natural effect. Excellent printing results with backgrounds and/or subjects in four-color printing. Ideal for labels that want to convey the natural, rustic, or organic character of the product.
Adhesive
Water-based acrylic permanent adhesive. Medium initial adhesion and ease of application make this paper ideal for glass labeling. Not recommended for extremely small diameter cylindrical products. Approved for indirect contact with food products. Application from +5 degrees and operating temperature between -10°C and +70°C.
Purpose
Winemaking (ideal for red wine labeling) • Food • Beverage -the perfect product for those who are environmentally conscious and committed to sustainability. APPLICATION ON DRY SURFACES IS RECOMMENDED.
Eco Friendly
Sheet
Front
Natural paper made of 80% recycled pulp. Birch colour. Weight 80 gr/m2. Natural uncoated surface with excellent printing results using CMYK colour method. The ideal paper to communicate and transfer to your customer the originality of your handcrafted product or the organic nature of your food.
Adhesive
Water base permanent acrylic adhesive. Medium initial adhesion and easy application make this material ideal to be used for labelling glass bottles. Approved for indirect contact with foodstuffs. Applications from +5° C and service temperature between -10°+70° C
Purpose
Food • Wine (only red wines) • Beverage The right choice to care about sustainability. WE HIGHLY RECOMMEND TO ADD A UV VARNISH PROTECTION AND TO STICK ONTO DRY SURFACES.
Sheet
Front
90 g/m2 natural paper in yellow/green color. Uncoated surface made from dried grass fibers. The color might vary from batch to batch and over time, reflecting the composition of this special product. From a design perspective, it is advised to leave ample space for the paper's natural color as a background and to avoid high coverage.
Adhesive
Permanent acrylic adhesive. Medium initial adhesion and easy application make this paper ideal for glass labeling. ISEGA-approved adhesive (direct contact with dry and moist, non-greasy foods). Application from +5 degrees and operating temperature between -20°C and +70°C. Not recommended for extremely small-diameter cylindrical products.
Purpose
Winemaking (ideal for labeling both red and white wines for refrigeration) • Food • Beverage This paper's unique composition makes it an ideal choice for "dressing" natural, artisanal, handmade, organic products. Grass is a rapidly renewable source, allowing for more sustainable production. UV protective varnish is highly recommended. Reels should be wound with labels facing outwards.
Insulated (Ice Bucket)
Sheet
Front
Wet strenght natural embossed white paper. Weight 120 g/m2. Natural embossed surface with excellent printing results using CMYK colour method. Ideal for elegant labels, combined to high value finishing such as Hot foil and 3d screen varnish that will operate in ice bucket or high condensation scenarios.
Adhesive
Acrylic permanent adhesive. Medium initial adhesion and easy application make this material ideal to be used for labelling glass bottles. This adhesive is approved by ISEGA (direct contact dry and moist, non fatty foodstuffs). Applications from +5° C and service temperature between -20°+70° C
Purpose
Food • Wine (excellent for sparkling wine, champagne, spirits and similar) • Beverage (excellent for beer) A classic product rich in elegance and naturalness. High quality labels for beverage and wine. Excellent water resistance with good stability after immersion in ice water. For neck labels and small diameter bottles, we highly recommend to test the material for the intended application. The performance of the material on non-perfectly cylindrical containers must be validated for the specific product application WE HIGHLY RECOMMEND TO ADD A UV VARNISH PROTECTION AND TO STICK ONTO DRY SURFACES. REELS MUST BE WOUND WITH THE FACE-SIDE OUT
Sheet
Front
Wet strenght natural extra white paper. Weight 120 g/m2. Felt-marked texture surface with excellent printing results using CMYK colour method. Ideal for elegant labels, combined to high value finishing such as Hot foil and 3d screen varnish that will operate in ice bucket or high condensation scenarios.
Adhesive
Acrylic permanent adhesive. Medium initial adhesion and easy application make this material ideal to be used for labelling glass bottles. This adhesive is approved by ISEGA (direct contact dry and moist, non fatty foodstuffs). Applications from +5° C and service temperature between -20°+70° C
Purpose
Food • Wine (excellent for sparkling wine, champagne, spirits and similar) • Beverage (excellent for beer) A classic product rich in elegance and naturalness. High quality labels for beverage and wine. Excellent water resistance with good stability after immersion in ice water. For neck labels and small diameter bottles, we highly recommend to test the material for the intended application. The performance of the material on non-perfectly cylindrical containers must be validated for the specific product application WE HIGHLY RECOMMEND TO ADD A UV VARNISH PROTECTION AND TO STICK ONTO DRY SURFACES. REELS MUST BE WOUND WITH THE FACE-SIDE OUT
Sheet
Front
Wet strenght white matt coated paper. Weight 120 g/m2. Smooth surface with excellent printing results using CMYK colour method.
Adhesive
Acrylic permanent adhesive. Medium initial adhesion and easy application make this material ideal to be used for labelling glass bottles. This adhesive is approved by ISEGA (direct contact dry and moist, non fatty foodstuffs). Applications from +5° C and service temperature between -20°+70° C
Purpose
Food • Wine (excellent for sparkling wine, champagne, spirits and similar) • Beverage (excellent for beer) A classic product rich in elegance and naturalness. High quality labels for beverage and wine. Excellent water resistance with good stability after immersion in ice water. For neck labels and small diameter bottles, we highly recommend to test the material for the intended application. The performance of the material on non-perfectly cylindrical containers must be validated for the specific product application WE HIGHLY RECOMMEND TO ADD A UV VARNISH PROTECTION AND TO STICK ONTO DRY SURFACES. REELS MUST BE WOUND WITH THE FACE-SIDE OUT
Sheet
Front
Natural paper made from pure cellulose, embossed, chlorine-free (ECF), with a pearlescent effect of 110 g/m² with water-resistant treatment. Textured surface, ideal for luxury products like sparkling wines, spirits, high-end cosmetics. Perfectly matched with enhancements like hot stamping and screen-printed reliefs.
Adhesive
Water-based acrylic permanent adhesive. Medium initial adhesion and ease of application make this support ideal for glass labeling. Approved for indirect contact with food products. Application from +5 degrees and operating temperature between -10°C and +70°C.
Purpose
Winemaking (ideal for labeling all types of wine, especially for ice bucket use) • Food • Beverage UV PROTECTIVE VARNISH IS HIGHLY RECOMMENDED. THE REELS MUST BE WOUND WITH THE LABELS FACING OUTWARDS